Home > Dos Driver > Dos Driver For Sata Cd Rom

Dos Driver For Sata Cd Rom

Contents

It is possible that this version of DOS has been taken off 98SE or ME. Clearly someone has gotten this working. Following installation, the CD-ROM software driver is normally loaded at system startup time via a series of entries in the machine's C:\CONFIG.SYS & C:\AUTOEXEC.BAT files. However i've found that: http://www.hiren.info/downloads/dos-files if you go down, you can find: "gcdrom.sys - SATA Native IDE CD/DVD-ROM driver (Supports Intel ICH6/ICH7/ICH8, JMicron 361/363/368, NVidia CK804/MCP55/MCP51...(may not work with PATA)" http://digitalcompulsion.com/dos-driver/dos-driver-for-sata.php

I'll have a go at it for you malcolm1939Sep 8, 2012, 3:17 AM realmadmartian said: I have an Intel motherboard D975XBX and a Plextor PX-755SA SATA DVD drive. I also checked the Silicon Image web site and it says "Operating Systems that are not listed above are not supported". I tried DOSBOX but it doesn't appear to support SATA. BART has also written to CD's and made them bootable.

Gcdrom.sys Dos Driver Download

The driver then uses "PIO mode" for all data input. /UX should be needed only for tests and diagnostic work. I tried a GCDROM.SYS file I got from the Gigabyte site, but it doesn't work, most likely because it is made for a different SATA chipset. I also use TeraByte's super Image From DOS, BootiT NG, and other products. Make sure to backup all files before reformatting.

It has a better - sleeker - shareware free menu. But when i boot my DOS device, it doesn't recognize SATA HardDisks (i've 2 HardDisks, both in FAT32). CD-ROM Drivers MS-DOS and Windows 3.x (CD-ROM's for Windows are installed via MS-DOS but may have a Windows Setup available) In order to use a CD-ROM Drive, your computer must first Ntfs4dos Each comes with a makedisk app.

Otherwise it oughta be easy enough to pick up a used non-sata computer and use that for dos stuff. Back to top #6 rotor123 rotor123 Moderator 8,065 posts OFFLINE Gender:Male Location:New Jersey Local time:04:55 PM Posted 11 February 2014 - 01:53 PM DOS should see the SATA drives if Although it is valuable, /UF must be TESTED on every system, and "Fast UltraDMA" should be enabled with CARE!! /UX Disables ALL UltraDMA, even for CD-ROM drives capable of it. You risk damaging the XP installation by attempting what you are doing, plus you'd need drivers for sound and perhaps video (depending on the games); another issue that XP may not

I have many images created by v. 9 and 10 of TrueImage. Dos Cd Rom Driver Syntax: device=gcdrom.sys [options] devicehigh=gcdrom.sys [options] [Main menu] [top] (Syntax) [Options] [Comments] [Examples] [See also] [File] Options: /AX Excludes ALL audio functions. However you may want to install a DOS Driver in this way to enable you to use your CD-ROM at the DOS Prompt. I don't want to let you hurry, but...

Dos Sata Driver

I need to boot to DOS to run an old CDROM game. File- and folder names and limited to 8.3 characters.For NTFS formated HDDs, You are expecting our help, we are expecting your response !!! Gcdrom.sys Dos Driver Download Report • #5 paulsep August 28, 2011 at 14:39:17 Search the BIOS for controller options, that may have todo with SATA.You are expecting our help, we are expecting your response !!! Freedos List All Drives I don't know why it's seeing the sata drive.You may be able to work something out by booting with that disk and running the dos stuff but I still think, as

Here is a good article about using Puppy to copy files. More about the author Such opinions may not be accurate and they are to be used at your own risk. I've only heard of DOS drivers for accessing AHCI DVD drives - otherwise someone would have to develop a DOS driver for each brand (and possibly model) of SATA controller chip. Stefan Top marcella Post subject: DOS not needed to boot from SATA CD-ROMPosted: Thu Jan 18, 2007 11:58 am Joined: Thu Jan 18, 2007 11:10 amPosts: 2 I Shsucdx

Related Resources ASUS M2A-VM HDMI not detecting sata dvd drives in dos solved Hi!:) I can't get sata DVD and hard drive to work on old ecs 775 board DVD Caldera solved Want a way to install chipset drivers CD without using a Sata-DVD RW solved Drive TS-L633J SATA will no longer burn DVD's solved Games on a SATA 1 DVD drive? Take Survey Now! http://digitalcompulsion.com/dos-driver/dos-driver-sata-dvd.php You will find the updated version (internet) here and the version described in this manual page here.

Sometimes your flash drive may have issues carrying files so this will completely restore it to manufacturing settings. Freedos Commands List NM, USA Course Of The Month 8 days, 10 hours left to enroll View June's Free Course Become a Premium Member and unlock a new, free course The first-specified drive is addressed as "unit 0", the second as "unit 1", etc.

cation.asp If it doesn't work (which is likely ;( ), then maybe contact Samsung's support to tell them they should release drivers for support of their SATA products under DOS :/

Keep in touch with Experts ExchangeTech news and trends delivered to your inbox every month Live Consultants Membership How it Works Gigs Live Careers Plans and Pricing For Business Become an I am not sure you will be able to get DOS to recognize a SATA drive. You should probably take a look at its config.sys and autoexec.bat (if they show on the cd) and see what they did. No go with a SATA DVD drive.

Does anybody have a working dvd-rom driver for sata for DOS? Examples are: /D:CDROM1 /D:MYCDROM etc. NOTE: Windows 95 OEM Service Release version 2 and later support drives larger than 2 GB using the FAT32 file system. news or read our Welcome Guide to learn how to use this site.

Another important feature is FreeDOS now support lots of hardware and have a very good extended memory support. Kga Sweden Greetings from the high desert in central New Mexico, where bootdisk.com is the only saving grace for the land of entrapment. Nothing special in the autoexec.bat and config.sys [email protected] OFFPROMPT $P$GLFNFOR ONSET DIRCMD=/4MODE CON RATE=32 DELAY=1REM LH KILLERLH DOSKEYLH DOSLFNLH SHSUCDX /D:IDE-CDREM ECHO.REM ECHO Now you are in MS-DOS 7.10 prompt.REM ECHO.CONFIG.SYSDOS=HIGH,UMBDEVICE=HIMEM.SYSREM http://www.bleepingcomputer.com/forums/t/2520/how-did-i-get-infected/Forum Rules, The BC Welcome Guide 167 @ June 2015 Back to top #7 Nuno111 Nuno111 Members 1 posts OFFLINE Local time:10:55 PM Posted 06 May 2014 - 08:23 AM

ES: C:\ i write: keyb it it works C:\games\pac_pc2 i write: keyb it "unknown command" C:\games\pac_pc2 i write: C:\keyb it it works So the first question is: You would need a utility capable of setting up a sata drive for a dos OS.But without more details it's all a guess. All Rights ReservedAd Choices The information on Computing.Net is the opinions of its users. Windows 95 Windows 95 does not need a CD-ROM Driver installed as above, as it installs its own driver.

Any idea where I can find a SYS file for mounting the DVD drive in DOS for my Intel mobo?